Intova IC-600 O-Ring Set

Product Description
Inner and outer ‘O’ ring set for the Intova IC-600 Underwater Housing

Buy Intova IC-600 O-Ring Set at Amazon

Olympus Silicone O-Ring for the PT-017 Underwater Housing.

Product Description
Replacement O-ring for the PT-017 Underwater Housing. Creates watertight seal. Underwater photographic equipment cannot be watertight unless the O Rings that seal it are flawless. Olympus recommends the O-ring is replaced by a new one at least once a year. See your PT-017 instruction manual for more information. Underwater photographic equipment cannot be watertight unless the O-rings that seal it are flawless. Always carry spare O-rings in your camera case. O-rings are the most important components of your underwater camera system. If the O-ring is lubricated, it will be elastic enough to shape itself uniformly around the channel. If it is dry, there will be too much friction to allow it to reshape itself uniformly. It will not safeguard against flooding. Every time you open the camera to change film, examine the O-ring and service if necessary. Always clean and lubricate after every diving day. When in doubt about the sealing capability of an O-ring, always discard and replace. Never use a sharp or pointed object to remove an O-ring! Use the O-ring remover tool. Don’t overgrease! Too much grease attracts debris that will disrupt the seal and cause flooding. Silicone grease is not a sealant; it only protects the O-ring from abrasion. A perfectly greased O-ring looks moist and shiny.

Buy Olympus Silicone O-Ring for the PT-017 Underwater Housing. at Amazon

Olympus POL-041W Replacement O-Ring for the PT-042 and PT-043 Underwater Housings

No description for this product could be found, but have a look over at Amazon for reviews and other information.
Buy Olympus POL-041W Replacement O-Ring for the PT-042 and PT-043 Underwater Housings at Amazon

Olympus O-Ring B Back for PT-023 Underwater Housing

Manufacturer Description
The Olympus O-Ring (B) (Back) for PT-023 Underwater Housing is a replacement back O-ring for the PT-023 Underwater Housing. Creates watertight seal. Olympus recommends the O-ring is replaced by a new one at least once a year. See your PT-023 instruction manual for more information.

Product Description
This O-ring for the PT-023 case provides silicone rubber packing for sealing the case.

Buy Olympus O-Ring B Back for PT-023 Underwater Housing at Amazon

Olympus PPO-05 O-ring for Underwater Cases

From the Manufacturer
The Olympus PPO-05 O-ring for Underwater Cases is designed to make deep-sea photography easy. The PPO-05 is the wide port used for combining the underwater case for the Olympus C-8080WZ (PT-023), the conversion lens adapter for the Olympus C-8080WZ (CLA-8), and the wide conversion lens (WCON-08D) with the Olympus C-8080WZ digital camera. Using the PPO-05 combined with the PT-023 gives you an underwater shooting wide-angle lens perfect for fascinating underwater photography.

Product Description
Olympus Back O-Ring f/ PPO-05 Underwater Housing

Buy Olympus PPO-05 O-ring for Underwater Cases at Amazon

Next Page »